Harmetall Sorten | Sorte | WC | Co | Tic+
TaNbC | Dichte | Härte
Rockwell | Härte
Vickers | Biege-
festigk | Korn-
größe | Klassifizierung
ISO-Bereich | | Einheit | % | % | % | g/cm³ | HRA | HV30 | N/mm² | µm | | | K05 | 95,0 | 4,0 | 1,0 | 15,0 | 92,5 | 1850 | 2200 | 1,5 | K05 | | K10 | 94,5 | 5,0 | 0,5 | 14,9 | 92,0 | 1800 | 2400 | 1,5 | K10 | | K20 | 93,0 | 7,0 | | 14,7 | 91,5 | 1700 | 2500 | 2,0 | K20 | | K30 | 91,0 | 9,0 | | 14,6 | 91,0 | 1630 | 2600 | 2,0 | K30 | | K40 | 89,0 | 11,0 | | 14,4 | 89,0 | 1360 | 2700 | 2,0 | K40 | | K05F | 94,0 | 6,0 | | 14,9 | 93,0 | 1870 | 2600 | 0,8 | K01-K10 | | K10F | 91,5 | 8,5 | | 14,7 | 92,0 | 1800 | 3100 | 0,8 | K05-K30 | | K20F | 90,5 | 9,5 | | 14,6 | 92,0 | 1800 | 3200 | 0,8 | K10-K30 | | K30F | 90,0 | 10,0 | | 14,5 | 91,5 | 1700 | 3800 | 0,8 | K15-K40 | | KXF | 89,7 | 10,0 | 0,3 | 14,5 | 92,0 | 1800 | 4200 | 0,8 | K10-K40 | | K40F | 88,0 | 12,0 | | 14,3 | 91,0 | 1630 | 4000 | 0,8 | K20-K50 | | K10FF* | 91,5 | 8,5 | | 14,7 | 92,0 | 1800 | 3200 | 0,5 | K05-K30 | | K40FF* | 88,0 | 12,0 | | 14,3 | 91,5 | 1700 | 4400 | 0,4 | K20-K50 | | G05 | 94,0 | 5,0 | 1,0 | 14,9 | 91,5 | 1700 | 2000 | 2,5 | K10 | | G10 | 93,5 | 6,5 | 0,5 | 14,8 | 91,0 | 1630 | 2400 | 2,5 | K20 | | G20 | 89,0 | 11,0 | | 14,4 | 89,5 | 1420 | 2700 | 2,5 | K40 | | G30 | 85,0 | 15,0 | | 14,0 | 88,0 | 1250 | 2900 | 2,5 | K50 | | G40 | 80,0 | 20,0 | | 13,5 | 86,0 | 1050 | 3000 | 2,5 | - | | G55 | 75,0 | 25,0 | | 13,0 | 84,0 | 870 | 2700 | 4,0 | - | | G20F | 89,0 | 11,0 | | 14,4 | 89,5 | 1420 | 3700 | 0,8 | K30-K50 | | G30F | 85,0 | 15,0 | | 14,0 | 88,0 | 1250 | 4000 | 0,8 | K40-K60 | | P10 | 56,0 | 9,0 | 35,0 | 10,2 | 90,8 | 1600 | 1550 | 2,5 | P10 | | P20 | 72,0 | 9,0 | 19,0 | 11,6 | 90,5 | 1550 | 2200 | 2,5 | P20 | | P25 | 73,0 | 10,0 | 17,0 | 12,3 | 90,0 | 1480 | 2300 | 2,5 | P25 | | P30 | 74,0 | 11,0 | 15,0 | 12,4 | 89,5 | 1420 | 2400 | 2,5 | P30 | | P40 | 77,0 | 13,0 | 10,0 | 12,8 | 89,3 | 1390 | 2500 | 3,0 | P40 | | Cermet | | | 80,0 | 5,6 | 91,5 | 1700 | 1500 | 2,5 | P10-P20 | | G20Ni | 91,0 | 9% Nickel | | 14,6 | 91,0 | 1630 | 2000 | 1,0 | - | | Tantung® | 50% Co, 30% Ni, 17% W+Ta, Nb, Mn, Fe | | | 8,8 | 83,5 | 850 | 2500 | - | - | | Hartmetall-Sorten in rotem Fettdruck sind HMTG-Standardsorten für unsere Standardartikel und für Sonderformen.
Hartmetall-Sorten in schwarzem Normaldruck sind HMTG-Sorten für Sonderformen und Standardartikel auf Sonderwunsch.
Hartmetall-Sorten in schwarzem Kursivdruck: Produktion eingestellt. Lagerware solange Vorrat reicht.
Andere Hartmetallsorten auf Anfrage. * Bei diesen Sorten: Bruttopreis +20%. | |
